Submitting Specimens From People with Possible Exposure to Chemical Agents

Preparing documentation

• Since blood tubes and urine cups cannot be shipped together in the same package, prepare a separate shipping manifest for each.
• Note on shipping manifest if urine sample is collected by means other than clean catch (e.g., catheterization).
• Place each shipping manifest (with specimen identification numbers) in a plastic zippered bag on top of the foam-insulated shipper lid, inside the cardboard outer container.
• Do not transport chain of custody forms with specimens. Each entity or organization handling the specimens is responsible for the specimens only during the time that it has control of the specimens.
• Each entity or organization receiving the specimens must sign-off on the chain-of-custody form of the entity or organization relinquishing the specimens to close that chain. Electronic procedures such as electronic chain of custody and barcode readers will expedite this process.
• When receiving specimens, each new entity or organization must begin its own chain of custody. The entity or organization relinquishing the specimens must sign its chain of custody to close the chain and indicate that they have transferred the specimens.

Note: When the person relinquishing the specimens (relinquisher) and the person receiving the specimens (receiver) are not together at the time of specimen transfer, the relinquisher must document on its chain of custody form that the receiver is the express courier (e.g., FedEx, Delta Dash, DHL, UPS) and must document the shipment tracking number or have the person transporting the specimens sign the chain-of-custody to indicate that he or she has taken control of the specimens. Likewise, when receivers get the specimens, they will document on their chain of custody form that the relinquisher is the express courier (and provide the tracking number) or have the person transporting the specimens sign the chain of custody form.

Packaging guidelines: blood tubes

Packaging consists of the following components:

• Primary receptacle: blood tubes.
• Secondary packaging: materials used to protect primary receptacles.
• Outer packaging: polystyrene foam-insulted, corrugated fiberboard shipper.

Secondary packaging for blood tubes

• To facilitate processing, package all blood tubes from the same patient together.
• Place absorbent material between the blood tubes and the first layer of secondary packaging. Use adequate absorbent material to absorb the entire contents of the blood tubes.
• Separate each tube of blood collected from other tubes to prevent tube-to-tube contact. The first layer of secondary packaging must be secured with one continuous strip of evidence tape and initialed half on the tape and half on the first layer of secondary packaging by the person making the seal. For example, one of the ways to do this is to—
  • Pack blood tubes in a gridded box lined with absorbent material. Seal the top half of the box to the bottom half with one continuous piece of evidence tape and write your initials half on the tape and half on the box.
• Wrap and seal the first layer of secondary packaging (e.g., gridded box) with absorbent material.
• Place the first layer of secondary packaging (e.g., gridded box) with absorbent material in the next layer of secondary packaging. An example of acceptable material is the Saf-T-Pak Disposable 2-Part Pressure Vessel system or its equivalent.
  • According to 49 CFR 173.199(b), if specimens are to be transported by air, either the primary receptacle or the secondary packaging used must be capable of withstanding, without leaking, an internal pressure producing a pressure differential of not less than 95 kPa (0.95 bar, 14 psi). Verify in advance that the manufacturer of either the blood tube or secondary packaging used in your facility is in compliance with the pressure differential requirement.

Outer packaging for blood tubes

• Use polystyrene foam-insulated, corrugated fiberboard shipper (may be available from your transfusion service or send-outs department).
• For cushioning, place additional absorbent material in the bottom of the shipper.
• Add a single layer of refrigerator packs on top of absorbent material.
• Place the packaged specimens on top of the refrigerator packs.
• Use additional cushioning material to minimize shifting while the shipper is in transit.
• Place additional refrigerator packs on top of the secondary packaging to maintain a shipping temperature of 1 °C–10 °C
• Place blood shipping manifest in a sealable plastic bag on the top of the foam-insulated shipper lid, inside the cardboard outer container.
• Keep chain-of-custody documents for your files.
• Place your return address in the upper left-hand corner of the shipper top and put CDC's receiving address in center.
• Affix labels and markings adjacent to the shipper's/consignee's address that appears on the shipper.
• Place the UN 3373 label and the words "Biological Substance, Category B" adjacent to the label on the front of the shipper.

Packaging guidelines: urine cups

Packaging consists of the following components:

• Primary receptacle: urine cups.
• Secondary packaging: materials used to protect primary receptacles.
• Outer packaging: polystyrene foam-insulted, corrugated fiberboard shipper.

Secondary packaging for urine cups

• Separate each urine cup from other urine cups to prevent contact between urine cups. The first layer of secondary packaging must be secured with one continuous strip of evidence tape and initialed half on the tape and half on the first layer of secondary packaging by the person making the seal. For example, one of the ways to do this is to—
  • Pack urine cups in a gridded box lined with absorbent material. Seal the top half of the box to the bottom half with one continuous piece of evidence tape and write your initials half on the tape and half on the box.
• Place urine cups, boxed and secured properly with evidence tape, in the next layer of secondary packaging. An example of acceptable material is the Saf-T-Pak Disposable 2-Part Pressure Vessel system or its equivalent.

Outer packaging for urine cups

• Use polystyrene foam-insulated, corrugated fiberboard shipper (may be available from your transfusion service or send-outs department).
• For cushioning, place additional absorbent material in the bottom of the shipper.
• Place a layer of dry ice on top of the absorbent material. Do not use flakes or large chunks of dry ice for shipment because large chunks have the potential for shattering urine cups during transport.
• Ensure that specimens will remain frozen or will freeze during transport.
• Place packaged urine cups in the shipper.
• Use additional absorbent or cushioning material between wrapped urine cups to minimize shifting while shipper is in transit.
• Place an additional layer of dry ice on top of samples.
• Place the urine shipping manifest in a sealable plastic bag on the top of the foam-insulated shipper lid, inside the cardboard outer container.
• Keep chain-of-custody documents for your files.
• Place your return address in the upper left-hand corner of the shipper top and put CDC's receiving address in center.
• Place the UN 3373 label and the words "Biological Substance, Category B" adjacent to the label on the front of the shipper.
• Place a Class 9/UN 1845 hazard label on the same side of the shipper as the UN 3373 marking.
• If the proper shipping name, (either dry ice or carbon dioxide, solid) and Class 9/UN 1845 is not preprinted on the hazard label, add it in an area adjacent to the label.
• Note the weight of dry ice (in kg) on the preprinted area of the hazard label, or place that information adjacent to the Class 9/UN 1845 hazard label.
• Orientation arrows are not required on a shipper containing "Biological substance, category B." If you use arrows, be sure to orient the inner packaging so that closures are aligned with the arrows.
• If the shipper will be transported by a commercial air carrier, complete an airway bill. On the airway bill, note the proper shipping name and UN number for each hazardous material and identify a person responsible for the shipper per IATA packing instruction 650.

Shipping specimens

Follow the guidance provided in your state's chemcial exposure comprehensive response plan. If you are directed to ship the specimens to Centers for Disease Control and Prevention (CDC), please ship the specimens to the following address:

CDC Warehouse
3719 N Peachtree Road
Chamblee, GA 30341
ATTN: Incident Response Laboratory/ERB
Point of Contact's Telephone Number
Email: IncidentResponse@cdc.gov

Questions

For questions concerning these instructions, please contact:

Centers for Disease Control and Prevention
NCEH/DLS/Emergency Response Branch
Incident Response Laboratory
Email: IncidentResponse@cdc.gov