NIOSH logo and tagline

Workplace Survey Reports – All Reports

NOTE: All of the reports linked below are in Adobe’s PDF format. Please visit Adobe’s Web site to download their free reader.

List of all Survey Reports
ECTB
Number
Year Sector Title
2024-DFSE-1618 2024 Manufacturing Investigation of Ventilation Engineering Controls for Stone Countertop Fabrication
2023-DFSE-1489 2023 Manufacturing Characterization of Airborne Dust Generated from the Grinding of Natural and Engineered Stone Products
2022-DFSE-1109 2022 Construction Comparison of Removing Mortar by Powered Chisels, Manual Chisels and Angle Grinders
2022-DFSE-959 2022 Manufacturing Design and Evaluation of low Cost, Custom, Retrofitted Engineering Controls for 3D printing
2022-DFSE-822 2022 Healthcare and Social Assistance Engineering Controls for Post-Operatory Waste Anesthetic Gases – Baseline Data Collection
2022-DFSE-820 2021 Construction Removing Mortar by Wet Grinders and Powered Chisels with On-tool Local Exhaust Ventilation
2021-DFSE-710 2021 Manufacturing Engineering Control of Silica Dust from Stone Countertop Fabrication and Installation – Evaluation of Wetting Methods for Grinding
DART 18-181 2019 Engineering Control Evaluation at Veterinary Hospital G
DART 18-74 2019 Engineering Control Evaluation at Veterinary Hospital C
DART 18-75 2019 Engineering Control Evaluation at Veterinary Hospital D
DART 19-74 2019 Engineering Control Evaluation at Veterinary Hospital F
380-11a 2019 Engineering Control Evaluation at Veterinary Hospital A
380-12a 2019 Engineering Control Evaluation at Veterinary Hospital B
380-15a 2019 Engineering Control Evaluation at Veterinary Hospital E
2020-DFSE-165 2019 Manufacturing Field Evaluation of a Mobile Dust Control Booth for Stone Countertop Grinding
19-114 2019 Construction Laboratory Evaluation of Saw Blades for Cutting Fiber-Cement Siding
368-16a 2019 Construction Concrete Surface Preparation Tools Machine 7
383-11a 2019 Public Safety Development of a Dry Decontamination Method for Mass Casualty Events – the NIOSH DryCon System
381-15a 2019 Construction Removing Mortar with a Die Grinder with on-Tool Local Exhaust Ventilation
381-14a 2019 Construction Removing Mortar With a Powered Saw and Modified On-Tool Hood
381-13a 2018 Construction Mixing Thinset Mortar in a 5 Gallon Bucket With a Dust Control
381-12a 2018 Construction Removing Mortar with a Powered Chisel with on-Tool Local Exhaust Ventilation and a Higher-Flow Vacuum Cleaner
381-11a 2018 Construction Removing Mortar with a Powered Mortar-Raking Chisel with on-Tool Local Exhaust Ventilation
375-12a 2015 Manufacturing, Construction Engineering Control of Silica Dust from Stone Countertop Fabrication and Installation
375-11a 2016 Manufacturing, Construction Engineering Control of Silica Dust from Stone Countertop Fabrication and Installation
374-11a 2015 Public Safety Rapid Dry Field Decontamination Method for Firefighters
373-12a 2015 Oil and Gas Field Evaluation of the NIOSH Mini-Baghouse Assembly Generation 3 for Control of Silica Dust on Sand Movers
373-11a 2015 Oil and Gas Field Evaluation of a NIOSH Mini-Baghouse Assembly for Control of Silica Dust on Sand Movers
368-15a 2017 Construction Concrete Surface Preparation Tools Machine 6
368-14a 2015 construction Concrete Surface Preparation Tools Machine 5
368-13a 2015 construction Concrete Surface Preparation Tools Machine 4
368-12a 2015 construction Concrete Surface Preparation Tools Machines 2 & 3
368-11a 2015 Construction Concrete Surface Preparation Tools Machine 1
364-12a 2015 Containment Assessment of Nanomaterial Handling Enclosures at Academic Research Laboratories Using Carbon Nanotubes and Graphene
364-11a 2013 Evaluation of a Nanomaterial Handling Enclosure conducted at the Alice Hamilton Laboratories
360-13a 2015 Comparison of Three Noise Reduction Rating Calculators for Passive and Active Hearing Protection Devices
360-11a 2015 Oil and Gas Field-Testing NIOSH HPD Well-Fit:Off-Shore Oil Rig Inspectors in Texas & Louisiana
358-22a 2017 Construction Removing Mortar with a Powered Chisel with On-tool Local Exhaust Ventilation
358-21a 2017 Construction Laboratory Evaluation of Power Shears for Cutting Fiber-cement Siding
358-20a 2017 Construction Removing Mortar with a Powered Saw
358-19a 2017 Construction Removing Mortar with a Powered Chisel
358-18a 2017 Construction Mixing Mortar
358-16a 2014 Construction Evaluation of the dust generation and engineering control for cutting fiber-cement siding
358-15a 2014 Construction Partnering to Control Dust from Fiber-Cement Siding
358-14a 2014 Construction Partnering to Control Dust from Fiber-Cement Siding
358-13a 2014 Construction Partnering to Control Dust from Fiber-Cement Siding
358-12a 2013 Construction Partnering to Control Dust from Fiber-Cement Siding
358-11a 2013 Construction Partnering to Control Dust from Fiber-Cement Siding
356-20a 2014 Manufacturing Assessment of Engineering Controls for Reducing Contaminant Emissions from Producing Carbon Nanotubes
356-19a 2013 Manufacturing Case Study: Particle Emissions from the Processes of Machining Nanocomposites
356-18a 2013 Manufacturing Assessment of Nanoparticle Emissions from a Chemical Laboratory using Carbon Nanotubes
356-17a 2012 Manufacturing Evaluation of Enclosed Reactor for the Production of Aligned Carbon Nanotubes
356-16a 2012 Manufacturing EVALUATION OF ENCLOSING HOOD AND DOWNFLOW ROOM FOR NANOCOMPOSITE MANUFACTURING
356-15a 2012 Manufacturing CASE STUDY: Modifying Processes to Control Exposure to Engineered Nanographene Particles
356-13a 2012 Manufacturing Evaluation of Engineering Controls in a Manufacturing Facility Producing Carbon Nanotube-Based Products
356-12a 2011 Manufacturing ENGINEERING CONTROLS FOR NANO-SCALE GRAPHENE PLATELETS DURING MANUFACTURING AND HANDLING PROCESSES
356-11a 2012 Manufacturing EVALUATION OF ENGINEERING CONTROLS FOR MANUFACTURING NANOFIBER SHEETS AND YARNS
350-14a 2015 All Comparison of the Performances of Three Acoustic Test Fixtures Using Impulse Peak Insertion Loss Measurements Rudyard Michigan
350-13a 2013 All Comparison of Two Acoustic Test Fixtures for Measurement of Impulse Peak Insertion Loss
350-12a 2012 All DESIGN AND CONSTRUCTION OF AN ACOUSTIC SHOCK TUBE FOR GENERATING HIGH-LEVEL IMPULSES TO TEST HEARING PROTECTION DEVICES
350-11a 2012 All A CASE FOR USING A-WEIGHTED EQUIVALENT ENERGY AS A DAMAGE RISK CRITERION AS A DAMAGE RISK CRITERION
349-12a 2013 Evaluation of Smartphone Sound Measurement Applications
349-11a 2013 All Development and validation testing of an impulse noise meter
347-17a 2013 Construction Control Technology for Dowel Drilling in Concrete
347-16a 2013 Construction CONTROL TECHNOLOGY FOR DOWEL DRILLING IN CONCRETE
347-15A 2011 Construction CONTROL TECHNOLOGY FOR DOWEL DRILLING IN CONCRETE
347-14a 2011 Construction Control Technology For Dowel-Pin Drilling In Concrete Pavement
347-13a 2011 Construction Control Technology For Dowel-Pin Drilling In Concrete Pavement
347-12a 2011 Construction Control Technology For Dowel-Pin Drilling In Concrete Pavement
338-05c 2011 All Analysis of chinchilla temporary and permanent threshold shifts following impulsive noise exposure
334-11a 2008 Construction PRELIMINARY EVALUATION OF DUST EMISSIONS CONTROL TECHNOLOGY FOR DOWEL-PIN DRILLING
329-12c 2015 Services Experimental and Numerical Research on the Performance of Exposure Control Measures for Aircraft Painting Operations, Part III
329-12b 2012 Services Experimental and Numerical Research on the Performance of Exposure Control Measures for Aircraft Painting Operations, Part II
329-12a 2011 Services Experimental and Numerical Research on the Performance of Exposure Control Measures for Aircraft Painting Operations, Part I
326-12a 2008 Services Control Technology and Exposure Assessment for Electronic Recycling Operations Elkton Federal Correctional Institution Elkton, Ohio
322-15a 2012 Manufacturing Process Evaluation at Kraft Atlantic, Inc.
322-14a 2012 Manufacturing Engineering Control and Process Evaluation at Quaker Oats
322-13a 2011 Manufacturing Process Evaluation at Baker Boy
322-12a 2008 Manufacturing In-depth survey report: evaluation of engineering controls for the production of liquid and powder flavoring chemicals at Kerry Ingredients and Flavours, Inc., formerly Mastertaste, Inc., Commerce, California
322-11a 2008 Manufacturing In-depth Survey Report: Evaluation of Engineering Controls for the Mixing of Flavoring Chemicals
317-12a 2006 Construction In-Depth Survey Report of a Local Exhaust Ventilation Device for Supressing Respirable and Crystalline Silica Dust from Powered Saws, July 26-28, 2005
317-11a 2006 Construction In-Depth Survey Report of a Demonstration and Evaluation of Roofing Tile Saws and Cutters Controlling Respirable and Crystalline Silica Dust at Petersanddean Roofing Systems, Newark California, August 18-19, 2005
312-11a 2007 Manufacturing Advanced hearing protector study conducted at: General Motors Metal Fabricating Division Flint Metal Center – Flint, Michigan, January 2004 – February 2005, report no. EPHB 312-11a
309-05h 2009 An analysis of the blast overpressure study data comparing three exposure criteria
306-19b 2009 Manufacturing STYRENE EXPOSURES DURING FIBER REINFORCED WIND BLADE MANUFACTURING
306-19a 2008 Manufacturing Walk-through Survey Report: Styrene Exposures During Fiber Reinforced Wind Blade Manufacturing
306-18a 2007 Manufacturing In Depth Study: A Re-evaluation of Styrene and Noise Exposures in the Fiberglass-reinforced Plastic Boat Manufacturing Industry
306-17a 2007 Manufacturing In-depth Survey Report: Styrene Exposures during Fiber Reinforced Plastic Boat Manufacturing at U.S.Marine Incorporated, August 28-31, 2006
306-16a 2007 Manufacturing In-Depth Study: An Occupational Exposure Assessment of Styrene and Noise in The Fiber-Reinforced Plastic Boat manufacturing Industry, August 14-18, 2006
306-15a 2006 Manufacturing Styrene and Noise Exposures During Fiber Reinforced Plastic Boat Manufacturing at Island Packet Yachts (IPY) Largo, Florida, October 14, 2005
306-14b 2009 Manufacturing STYRENE EXPOSURES DURING CLOSED MOLDING OF SMALL PARTS FOR FIBERGLASS BOATS
306-14a 2005 Manufacturing Walk-Through Survey Report: Styrene and Noise Exposures During Fiber Reinforced Plastic Boat manufacturing at Sea Ray Boats, Vonore, Tennessee, October 27-28, 2005
306-13a 2005 Manufacturing Walk-Through Survey Report: Styrene and Noise Exposures During Fiber Reinforced Plastic Boat Manufacturing at Century Boat company Inc. Panama City, Florida, December 2005
306-12b 2008 Manufacturing STYRENE AND NOISE EXPOSURES DURING FIBER REINFORCED PLASTIC BOAT MANUFACTURING
306-12a 2005 Manufacturing Walk-Through Survey Report: Styrene and Noise Exposures During Fiber Reinforced Plastic Boat Manufacturing, September 2005
306-11b 2005 Manufacturing Walk-Through Survey Report: Styrene and Noise Exposures During Fiber Reinforced Plastic Boat Manufacturing at U.S. Marine Incorporated, Arlington Virginia, August 2005
306-11a 2005 Manufacturing In-Depth Survey Report: Styrene and Noise Exposures During Fiber Reinforced Plastic Boat Manufacturing at Larson/Glastron Inc. Little Falls Minnesota, April 2005
301-05f 2012 Healthcare and Social Assistance Expedient Methods for Surge Airborne Isolation within Healthcare Settings during Response to a Natural or Manmade Epidemic
295-11a 2003 Manufacturing Walk Through Report: Observations And Recommendations For Reducing Exposure To Chloramines
294-05A 2003 Services MDI Concentrations During Application Of Spray-On Truck Bed-Liners
289-14a 2011 FOLLOW UP EVALUATION OF KOHLER LOW EMISSION TECHNOLOGY TO PREVENT CARBON MONOXIDE POISONINGS FROM HOUSEBOAT GENERATOR EXHAUST
289-12a 2007 Transportation, Warehousing, and Utilities Evaluation of Carbon Monoxide Concentration With and Without Catalytic Emission Controls from Gasoline Propulsion Engines, December 11-18, 2006
289-11a 2006 Transportation, Warehousing, and Utilities In-Depth Survey Report of Carbon Monoxide Emissions and Exposures on Express Cruisers Under Various Operating Conditions, Florida, North Carolina and New Jersey, July 7-December 15, 2005
282-26a 2014 Construction Respirable Crystalline Silica Exposure During Pavement Milling Using a Caterpillar Milling Machine Equipped with a Local Exhaust Ventilation System
282-25a 2013 Construction Control Technology for Crystalline Silica Exposure During Pavement Milling Using a Roadtec Milling Machine Equipped with a Local Exhaust Ventilation System
282-24a 2013 Construction Evaluation of a Volvo Milling Machine Equipped with a Wet Drum Designed to Reduce Respirable Crystalline Silica Exposure During Pavement Milling
282-23a 2013 Construction Control Technology for Crystalline Silica Exposure During Pavement Milling Using a Wirtgen Milling Machine Equipped with a Vacuum Cutting System
282-22a 2012 Construction A Laboratory Evaluation of a Local Exhaust Ventilation System on a Caterpillar Cold Milling Machine at Caterpillar, Minnesota
282-21a 2013 Construction A Laboratory Evaluation of a Local Exhaust Ventilation System on a Roadtec Cold Milling Machine at Roadtec, Chattanooga, Tennessee
282-20a 2011 Construction A Laboratory Evaluation of a Prototype Local Exhaust Ventilation System on a Terex Cold Milling Machine at Terex Roadbuilding, Oklahoma City, Oklahoma
282-19a 2011 Construction A Laboratory Evaluation of Capture Efficiencies of the Vacuum Cutting System on a Wirtgen W 250 Cold Milling Machine at Payne & Dolan Inc., Racine, Wisconsin
282-18a 2011 Construction DUST-CONTROL TECHNOLOGY FOR ASPHALT-PAVEMENT MILLING Controlled-site testing at State Highway 47, Bonduel, Wisconsin
282-17a 2011 Construction DUST-CONTROL TECHNOLOGY FOR ASPHALT-PAVEMENT MILLING
282-16a 2009 Construction In-Depth Field Evaluation…Dust-Control Technology For Asphalt Pavement Milling
282-15a 2009 Construction In-Depth Field Evaluation…Dust-Control Technology For Asphalt Pavement Milling
282-14a 2009 Construction In-Depth Field Evaluation…Dust-Control Technology For Asphalt Pavement Milling
282-13 2007 Construction In Depth Survey of Dust Control Technology for Cutting Concrete Block and Tuckpointing Brick, July 26-27, 2001
282-12a 2007 Construction In-Depth Survey of Dust Control Technology for Asphalt Milling, July 13-15, 2004
282-11c-2 2004 Construction In-Depth Survey Report Of A Water Spray Device For Suppressing Respirable And Crystalline Silica Dust From Jackhammers
282-11c 2004 Construction In-Depth Survey Report of a Water Spray Device for Suppressing Respirable and Crystalline Silica Dust from Jackhammers at E.E. Cruz Company, South Plainfield, New Jersey, August 9, 2002
282-11b 2004 Construction Results of a Pilot Study of Dust Control Technology for Asphalt Milling at Payne & Dolan Inc. Project, Wisconsin, October 7-9, 2003
282-11a 2002 Construction In-Depth Survey Report of Control of Respirable Dust and Crystalline Silica from Breaking Concrete with a Jackhammer at Bishop Sanzari Companies, North Bergen, New Jersey, July 26, 2002
279-26a 2010 Services Multiple Envelope Particle Expulsion Test of an Existing Advanced Facer Canceller System (AFCS) and an AFCS 200 Configuration
279-25a 2010 Services Single Letter Particle Expulsion Comparison of an Existing Advanced Facer Canceller System (AFCS) and an AFCS 200 Configuration
279-24a 2009 Services Comparison of Biohazard Detection System Capture Efficiencies of an Existing Advanced Facer Canceller System and a Prototype Advanced Facer Canceller System 200 Configuration at the Santa Ana Processing and Distribution Center
279-23a 2007 Services Preliminary Testing of the Modified Mail Pass and Biohazard Detection System for the Ventilation and Filtration System of the Automated FACER Canceller System, September 26, 2006
279-22 2005 Services Re-Evaluation of Ventilation/Filtration System for Revised Hand-Cull Stations of the 010 Culling System at United States Postal Service, Processing and Distribution Center, Baltimore, Maryland, June 2005
279-21a 2005 Services In-Depth Survey Report: Evaluation Of Ventilation And Filtration System For LMDS And DPRC
279-20a 2004 Services In-Depth Survey Report: Evaluation of Ventilation/Filtration System for the 010 Culling System at the United States Postal Service, Cleveland Processing and Distribution Center, Cleveland, Ohio, March 11-14, 25-28, 2003
279-19a 2004 Services In-Depth Survey Report: Evaluation of Local Exhaust Ventlation Systems for the Advanced Facer Canceller System at the United States Postal Service, Cleveland Processing and Distribution Center, Cleveland, Ohio, March 25-26, 2003
279-18a 2004 Services In-Depth Survey Report: Evaluation of the Ventilation and Filtration System and Biohazard Detection System for the Automated Facer Canceller System at the United States Postal Service, Dulles Processing and Distribution Center, Cleveland, Ohio, June 24, 2
279-17a 2003 Services In-Depth Survey Report: Evalution of Ventilation and Filtration System for Delivery Bar Code Sorter at the United States Postal Service, Dulles Processing and Distribution Center, Dulles, Virginia, December 13, 2002
279-16a 2003 Services In-Depth Survey Report: Evaluation of the Ventilation and Filtration System and Biohazard Detection System for the Automated Facer Canceller System at the United States Postal Service, Dulles Processing and Distribution Center, Dulles, Virginia, October 7
279-15a 2002 Services In-Depth Survey Report: Evaluation of Local Exhaust Ventilation System for Advanced Flat Sorter Machine 100 at United States Postal Service, Baltimore Processing and Distribution Center, Baltimore, Maryland, June 4, 2002
279-14a2 2003 Services In-Depth Survey Report: Evaluation of Local Exhaust Ventilation System for the 010 Culling System at United States Postal Service, Merrifield Processing and Distribution Center, Merrifield, Virginia, October 9-10, 15, 17, 2002
279-14a1 2003 Services In-Depth Survey Report: Evaluation of Local Exhaust Ventilation System for the 010 Culling System at United States Postal Service, Merrifield Processing and Distribution Center, Merrifield, Virginia, June 17-18, 2002
279-13a 2010 Services Biohazard Detection System Capture Efficiency Comparison of an Existing Advanced Facer Canceller System (AFCS) and an AFCS 200 Configuration at the North Texas Processing and Distribution Center
279-12a 2002 Services In-Depth Survey Report: Evaluation of Local Exhaust Ventilation System for Advanced Flat Sorter Machine at United States Postal Service, Baltimore Processing and Distribution Center, Baltimore, March 6, 2002 and March 20, 2002
279-11a 2002 Services In-Depth Survey Report: Evaluation of Ventilation and Filtration System for Delivery Bar Code Sorter at United States Postal Service, Dulles Processing and Distribution Center, Dulles, Virginia, January 23, 2002 and March 20, 2002
278-11a 2004 Services In-Depth Survey Report: Evaluation Of General Exhaust Ventilation System
263-13a 2007 Services Control Technology and Exposure Assessment for Occupational Exposure to Beryllium: Abrasive Blasting With Coal Slag, June 21-23, 2004
263-12a 2004 Manufacturing Control Technology And Exposure Assessment For Occupational Exposure To Beryllium: Michigan Spring And Stamping Muskegon, Michigan
256-19b 2002 Manufacturing In-Depth Survey Report: Control of Perchloroethylene (PCE) in Vapor Degreasing Operations, Site #1
256-18b 2002 Manufacturing In-Depth Survey Report: Control of Perchloroethylene (PCE) in Vapor Degreasing Operations, Site #4
256-17b 2002 Manufacturing In-Depth Survey Report: Control of Perchloroethylene (PCE) in Vapor Degreasing Operations, Site #3
247-22 2003 Manufacturing Control Technology And Exposure Assessment For Occupational Exposure To Crystalline Silica: Stone Monument Manufacturing
247-21 2002 Construction In-Depth Survey Report of Control of Respirable Dust and Crystalline Silica from Grinding Concrete at Messer Construction, Newport, Kentucky, and Baker Concrete Construction, Dayton, Ohio
247-20 2001 Construction In-Depth Survey Report: Control Technology for Crystalline Silica Exposures in Construction: Field Evaluation of Control Measures for Tuck-Pointing, The Farell Building, Huntington, West Virginia, May 21-25, 2001
247-19 2001 Construction Control Technology For Ready-Mix Truck Drum Cleaning:
247-18 2001 Construction In-Depth Study Report: Control Technology For Crystalline Silica Exposures In Construction: The Effect Of Exhaust Flow Rate Upon The Respirable Dust Emissions For Tuck Pointing Operations And A Preliminary Evaluation Of A Ventilated Tool For Brick Cutting
247-15d 2002 Construction In-Depth Survey Report: Control of Silica Exposure in Construction Scabbling Concrete at Frank Messer and Sons Construction Company, Hebron, Kentucky, June 28 and July 12, 2001
247-15c 2002 Construction In-Depth Survey Report: Control of Silica Exposure from Hand Tools in Construction Grinding Concrete at Frank Messer and Sons Construction Company, Newport, Kentucky, February 21, 22 and 26, 2001, and March 2 and 6, 2001
247-15b 2002 Construction In-Depth Survey Report of Exposure to Silica from Demolition of Plaster Ceilings at Frank Messer and Sons Construction Company, Columbus, Ohio, April 25-26, 2001
247-15a 2001 Construction In-Depth Survey Report of Four Sites: Exposure to Silica from Hand Tools in Construction Chipping, Grinding, and Hand Demolition at Frank Messer and Sons Construction Company, Lexington and Newport, Kentucky, and Columbus and Springfield, Ohio, May 26 and
247-14 2000 Construction In-Depth Survey Report: Control Technology for Crystalline Silica Exposures in Construction: Exposures and Preliminary Control Evaluation at a Restoration Preservation Masonry Construction Site, Boston, Massachusetts, April 10-11, 2000
247-12 2000 Construction In-Depth Survey Report: Control Technology for Crystalline Silica Exposures in Construction: Exposures and Preliminary Control Evaluation at Various Sites for Bricklayers Local #9, Pittsburgh, Pennsylvania, June 14-16, 1999
247-11 1999 Construction In-Depth Survey Report: Control Technology for Crystalline Silica Exposures in Construction: Wet Abrasive Blasting at the Nokia Building Construction Site, Irving, Texas, March 30-April 1, 1999, and April 13-16, 1999
246-11a 2003 Manufacturing Survey Report: An Engineering Control Evaluation for Reducing Exposure to Refractory Ceramic Fibers During Sanding at Fireline, Inc., Youngstown, Ohio, November 5, 2002
245-11a 2000 Manufacturing In-Depth Survey Report: Evaluation of and Recommendations for Control Technology in Gray-Iron Foundry Shake-Out at Eljer Plumbingware, Shake-Out Number Three, Salem, Ohio, December 3-4, 1998
240-15 1999 Services In-Depth Survey Report: Evaluation of Control Technology for Perchloroethylene in Dry Cleaning Shops at Dry Cleaning Depot, New York, New York, April 14-28, 1998
240-14 2000 Services In-Depth Survey Report: Evaluation of Control Technology for Perchloroethylene in Dry Cleaning Shops at Golden State Cleaners, San Francisco, California, February 19-25, 1998
240-13 2000 Services In-Depth Survey Report: Comparison of Perchloroethylene Exposures Before and After the Installation of Local Exhaust Ventilation at a Commercial Dry Cleaners at Drycleaning Plus, Cincinnati, Ohio, August 25-28, 1998, September 8-11, 1998, January 25-29, 1
240-12 2000 Services In-Depth Survey Report: Evaluation of Control Technology for Perchloroethylene in Dry Cleaning Shops at Ten Ten Cleaners, San Francisco, California, February 18-24, 1998
240-11 1999 Services In-Depth Survey Report: Evaluation of Control Technology for Perchloroethylene in Dry Cleaning Shops, Jim Dandy Cleaners, New York, New York, April 16-22, 1998
231-20a 2004 Construction Survey Report: Control Technology Evalution for Controlling Worker Exposure to Asphalt Fumes from Roofing Kettles: Kettle Operated Using an Afterburner System at Nicholes Elementary School, San Antonio, Texas, November 26 -December 1, 2001
231-19a 2004 Construction Survey Report: Control Technology Evalution for Controlling Worker Exposure to Asphalt Fumes from Roofing Kettles: Kettle Operated Using an Afterburner System at Glenwood Elementary School, San Rafael, California, July 16-25, 2002
231-18a 2004 Construction Survey Report: Control Technology Evalution for Controlling Worker Exposure to Asphalt Fumes from Roofing Kettles: Kettle Operated Using an Afterburner System at Carroll Bell Elementary School, San Antonio, Texas, December 14, 17-18, 2001
231-17a 2004 Construction Survey Report: Control Technology Evalution for Controlling Worker Exposure to Asphalt Fumes from Roofing Kettles: Kettle Operated Using an Afterburner System at Tampa Bay Technical High School, Tampa, Florida, and West Park Village at West Chase, Tampa,
231-16a 2004 Construction Survey Report: Control Technology Evalution for Controlling Worker Exposure to Asphalt Fumes from Roofing Kettles: Kettle Operated Using an Afterburner System at 5900 Broadway, San Antonio, Texas, August 30-31, 2000
231-15a 2004 Construction Survey Report: Control Technology Evalution for Controlling Worker Exposure to Asphalt Fumes from Roofing Kettles: Kettle Operated Using an Afterburner System at Jo and George Marti Elementary School, Cleburne, Texas, February 4, 5, 11, 12, 18, and 19, 20
231-13a 2003 Construction In-Depth Survey Report: Control Technology Evaluation for Controlling Worker Exposure to Asphalt Fumes from Roofing Kettles: Kettle Operated Using Low Fuming Asphalt at Blue Valley West High School, Stilwell, Kansas, January 23-25, 2001
231-12b 2001 Construction In-Depth Survey Report: Control Technology Evaluation for Controlling Worker Exposure to Asphalt Fumes from Roofing Kettles: Kettle Operated Using Low Fuming Asphalt at Raytheon Corporation, Fort Wayne, Indiana, September 18-21, 2000.
231-11b 2001 Construction Survey Report: Control Technology Evaluation For Controlling Worker Exposure To Asphalt Fumes From Roofing Kettles: Kettle Operated Using Low Fuming Asphalt
231-11a 1998 Construction In-Depth Survey Report: Control Technology for Controlling Worker Exposure to Asphalt Fumes from Roofing Kettles: Kettle Operated Using the FRS-6000TM Filtration Unit at Dana Corporation, Columbus, Ohio, March 23-27, 1998
229-18b 2000 Manufacturing Interim Survey Report: Recommendations for Ergonomics Interventions for Ship Repair Processes at Todd Pacific Shipyards Corporation, Seattle, Washington, April 12-13, 2000
229-18a 2001 Manufacturing Preliminary Survey Report: Pre-Intervention Quantitative Risk Factor Analysis For Ship Repair Processes
229-17b 2000 Manufacturing Interim Survey Report: Recommendations for Ergonomics Interventions for Ship Recycling and Repair Processes at Puget Sound Naval Shipyard, Bremerton, Washington, October 20-21, 1999
229-15b 2000 Manufacturing Interim Survey Report: Recommendations for Ergonomics Interventions for Ship Construction Processes at Litton Ingalls Shipbuilding Shipyard, Pascagoula, Mississippi, March 20-21, 2000
229-13b 2000 Manufacturing Interim Survey Report: Recommendations for Ergonomics Interventions for Ship Construction Processes at Bath Iron Works Corporation Shipyard, Bath, Maine, April 17-19, 2000
229-12b 2000 Manufacturing Interim Survey Report: Recommendations for Ergonomics Interventions for Ship Construction Processes at Halter Moss Point Shipyard, Moss Point, Mississippi, November 29-30, 1999
229-11c 2000 Manufacturing Interim Survey Report: Recommendations for Ergonomics Engineering Interventions for Ship Construction Processes at Jeffboat LLC, Jeffersonville, Indiana, November 9-10, 1999
229-11b 1999 Manufacturing In-Depth Survey Report: The Effect of Weld Process and Ventilation Method on Physical Work Load, Weld Fume Exposure, and Weld Performance in a Confined-Space Welding Task at Jeffboat Shipyard, American Commercial Barge Lines (ACBL), Jeffersonville, Indian
229-11a 2000 Manufacturing Preliminary Survey Report: Pre-Intervention Quantitative Risk Factor Analysis For Ship Construction Processes
226-12a 2002 Manufacturing In-Depth Survey Report: Control of Dust in a Textile Dyeing Transfer Operation at Logisco Corporation, Charlotte, North Carolina, July 11, 2001
223-18a 2000 Agriculture, Forestry, and Fishing In-Depth Survey Report: Control Technology For Environmental Enclosures An Evaluation of In-Use Enclosures
223-17a 2000 Agriculture, Forestry, and Fishing In-Depth Survey Report: Control Technology for Environmental Enclosures – An Evaluation of In-Use Enclosures at Sun Pacific, Bakersfield, California, October 27, 1999
223-16a 2000 Agriculture, Forestry, and Fishing In-Depth Survey Report: Control Technology for Environmental Enclosures: An Evaluation of In-Use Enclosures at San Joaquin Helicopter Company, Delano, California, September 20-22 and October 26-28, 1999
223-15a 1999 Mining In-Depth Survey Report: Control Technology for Environmental Enclosures – The Effect of Wind Speed Upon Aerosol Penetration into an Enclosure at Clean Air Filter, Defiance, Iowa, August 3-7 and October 19-23, 1998
223-13a 1997 Agriculture, Forestry, and Fishing In-Depth Survey Report: Control Technology for Agricultural Environmental Enclosures at John Deere Manufacturing Co., Inc., Waterloo, Iowa, April 15-19 and August 5-9, 1996
223-11b 1997 Agriculture, Forestry, and Fishing In-Depth Survey Report: Control Technology for Agricultural Environmental Enclosures at Nelson Manufacturing Co., Inc., Yuba City, California, October 9-11, 1996
223-05i 2001 Agriculture, Forestry, and Fishing An Environmental Tractor Cab System Integrity Test
218-15a 2005 Manufacturing Comparison of Mist Generation Rates for an Experimental Metal Removal Fluid with a Baseline Fluid During Milling and Turning Operations, November 2005
218-13a 1997 Manufacturing In-Depth Survey Report: Characterization of Metalworking Mists During the Evaluation of a Commercial Air Cleaner at Sauer-Sundstrand Company, LaSalle, Illinois, March 4-5, 1997
218-12a 1997 Manufacturing In-Depth Survey Report: Concentration of Metalworking Mists Before and After Installation of a Commercial Air Cleaner at Sauer-Sundstrand Company, Ames, Iowa, June 8-14, 1995; August 1-3, 1995; and August 19-22, 1996
218-11a 1996 Manufacturing In-Depth Survey Report: Characterization of Metalworking Mists During the Evaluation of a Commercial Air Cleaner at Sauer Sundstrand, Ames, Iowa, June 8-14 and August 1-3, 1995
218-05r 2001 Manufacturing An Experimental Study Of Filter Loading With Liquid Aerosols
214-15a 1998 Manufacturing In-Depth Survey Report: Control Technology Assessment for the Welding Operations at Vermeer Manufacturing, Pella, Iowa, January 13-17, 1997
214-13a 1997 Manufacturing In-Depth Survey Report: Control Technology Assessment for the Welding Operations at Boilermaker’s National Apprenticeship Training School, Kansas City, Kansas, April 22-26, 1996
214-12a 1996 Manufacturing In-Depth Survey Report: Control Technology Assessment for the Welding Operations at United Air Specialists, Inc., Cincinnati, Ohio, September 28, October 18, and November 8, 1995, and January 31, 1996
214-11a 1996 Manufacturing In-Depth Survey Report: Control Technology Assessment for the Welding Operations at Cleveland Range, Inc., Cleveland, Ohio, August 1-3, 1995
212-15a 1994 Healthcare and Social Assistance Walk-Through Survey Report: Control Technology For Negative Pressure Rooms
212-14a 1994 Healthcare and Social Assistance Walk-Through Survey Report: Control Technology For Negative Pressure Rooms
212-13a 1994 Healthcare and Social Assistance Walk-Through Survey Report: Control Technology For Negative Pressure Rooms
212-12a 1994 Healthcare and Social Assistance Walk-Through Survey Report: Control Technology For Negative Pressure Rooms
212-11a 1994 Healthcare and Social Assistance Walk-Through Survey Report: Control Technology For Negative Pressure Rooms
210-11a 1995 Mining In-Depth Survey Report: Control Technology Comparative Evaluation of Rock-Drilling Rigs at Trumont Quarry, Hopkinton, Massachusetts, August 21-26, 1994
208-23a 2000 Construction In-Depth Survey Report: Field Evaluation of Dynapac Engineering Controls Designed to Reduce Occupational Exposures During Asphalt Paving Operations at San Antonio, Texas, April 28 – May 2, 1998
208-22a 2000 Construction In-Depth Survey Report: Field Evaluation of Roadtec Engineering Controls Designed to Reduce Occupational Exposures During Asphalt Paving Operations at Calhoun, Georgia, November 4-7, 1996
208-21a 2000 Construction In-Depth Survey Report: Field Evaluation of Caterpillar Engineering Controls Designed to Reduce Occupational Exposures During Asphalt Paving Operations at New Orleans, Louisiana, September 9-13, 1996
208-20a 2000 Construction In-Depth Survey Report: Field Evaluation of Champion Engineering Controls Designed to Reduce Occupational Exposures During Asphalt Paving Operations at Ridgland, South Carolina, December 9-14, 1996
208-19a 2000 Construction In-Depth Survey Report: Field Evaluation of Blaw-Knox Engineering Controls Designed to Reduce Occupational Exposures During Asphalt Paving Operations at Shiawassee County, Michigan, July 16-21, 1996
208-18a 2000 Construction In-Depth Survey Report: Field Evaluation of Cedarapids Engineering Controls Designed to Reduce Occupational Exposures During Asphalt Paving Operations at Tippecanoe County, Indiana, June 17-21, 1996
208-17a 1999 Construction In-Depth Survey Report: A Laboratory Evaluation of Prototype Engineering Controls Designed to Reduce Occupational Exposures During Asphalt Paving Operations at Dynapac Compaction and Paving, Selma, Texas, August 12-13, 1997
208-16a 1999 Construction In-Depth Survey Report: A Laboratory Evaluation of Prototype Engineering Controls Designed to Reduce Occupational Exposures During Asphalt Paving Operations at Caterpillar Paving Products (Barber-Greene), DeKalb, Illinois, March 12-15, 1996
208-15a 1999 Construction In-Depth Survey Report: A Laboratory Evaluation of Prototype Engineering Controls Designed to Reduce Occupational Exposures During Asphalt Paving Operations at Champion Road Machinery, Shippensburg, Pennsylvania, November 6-9, 1995
208-14a 1999 Construction In-Depth Survey Report: A Laboratory Evaluation of Prototype Engineering Controls Designed to Reduce Occupational Exposures During Asphalt Paving Operations at Blaw Knox Construction Equipment Corporation, Mattoon, Illinois, July 5-7, 1995
208-13a 1999 Construction In-Depth Survey Report: A Laboratory Evaluation of Prototype Engineering Controls Designed to Reduce Occupational Exposures During Asphalt Paving Operations at Roadtec Incorporated, Chattanooga, Tennessee, June 5-7, 1995
208-12a 1999 Construction In-Depth Survey Report: A Laboratory Evaluation of Prototype Engineering Controls Designed to Reduce Occupational Exposures During Asphalt Paving Operations at Cedarapids Incorporated, Cedar Rapids, Iowa, April 26-28, 1995
208-11a 1995 Construction In-Depth Survey Report: A Laboratory Comparison of Conventional Drywall Sanding Techniques Versus Commercially Available Controls at the Seattle-Area Apprenticeship Training Facility, the International Brotherhood of Painters and Allied Trades, Seattle, W
207-11 1997 Healthcare and Social Assistance Recommendations for Preventing the Transmission of Mycobacterium tuberculosis at Chiang Rai Hospital, Thailand, 1997
205-13a 1997 Services In-Depth Survey Report: Control of Airborne Solvents in a Small Offset Print Shop at Express Service Printing, Indianapolis, Indiana, August 9-11 and September 13-15, 1995
205-12a 1996 Services In-Depth Survey Report: Control of Airborne Solvents in a Small Offset Printing Shop at Economy Printing, Parchment, Michigan, May 8-10 and 22-24, 1995
202-15b 1996 Services In-Depth Survey Report: Control Technology for Metal Reclamation Industries at East Penn Manufacturing Company Inc., Lyon Station, Pennsylvania, December 12-16, 1994
202-15a 1994 Manufacturing Walk-Through Survey Report: Control Technology For Metal Reclamation Industries
202-14a 1994 Manufacturing Walk-Through Survey Report: Control Technology For Metal Reclamation Industries
202-13a 1994 Manufacturing Walk-Through Survey Report: Control Technology For Metal Reclamation Industries
202-12a 1993 Manufacturing Walk-Through Survey Report: Control Technology For Metal Reclamation Industries
202-11a 1993 Manufacturing Walk-Through Survey Report: Control Technology For Metal Reclamation Industries
201-19a 1995 Services In-Depth Survey Report: Perchloroethylene Exposures and Ergonomic Risk Factors in Commercial Dry Cleaners at Tuchman Cleaners Shop 24, Carmel, Indiana, September 6-9, 1994
201-18a 1995 Services In-depth survey report: chemical exposures and fire safety in commercial dry cleaners at A-One Cleaners, Cincinnati, Ohio January 23 – 27, 1995
201-17a 1995 Services In-Depth Survey Report: Perchloroethylene Exposures in Commercial Dry Cleaners at Tuchman Cleaners Shop 27, Fishers, Indiana, May 9-12, 1994
201-16a 1995 Services In-Depth Survey Report: Perchloroethylene Exposures in Commercial Dry Cleaners at Brown’s Cleaners, Santa Monica, California, August 15-18, 1994
201-15a 1995 Services In-Depth Survey Report: Control of Perchloroethylene Exposures in Commercial Dry Cleaners at Appearance Plus Cleaners, Cincinnati, Ohio, March 30-31, 1994
201-14a 1993 Services Walk-Through Survey Report: Perchloroethylene Exposures In Commercial Dry Cleaners
201-13b 1995 Services In-Depth Survey Report: Exposures During the Spotting Procedure in a Commercial Dry Cleaner at Widmer’s Dry Cleaning, Cincinnati, Ohio, August 29-31, 1994
201-13a 1993 Services Walk-Through Survey Report: Perchloroethylene Exposures In Commercial Dry Cleaners
201-12a 1993 Services Walk-Through Survey Report: Perchloroethylene Exposures In Commercial Dry Cleaners
201-11a 1993 Services Walk-Through Survey Report: Perchloroethylene Exposures And Ergonomic Hazards In Commercial Dry Cleaners
198-14b 1994 Services In-Depth Survey Report: Control Technology for Mine Assay Laboratories at Skyline Laboratories, Inc., Wheat Ridge, Colorado, December 14-16, 1993
198-14a 1994 Services Walk-Through Survey Report: Control Technology For Mine Assay Laboratories
198-13a 1994 Services Walk-Through Survey Report: Control Technology For Mine Assay Laboratories
198-12a 1993 Services Walk-Through Survey Report: Control Technology For Mine Assay Laboratories
198-11b 1994 Services In-Depth Survey Report: Control Technology for Mine Assay Laboratories at Pinson Mine, Winnemucca, Nevada, March 9-11, 1993
198-11a 1993 Services Walk-Through Survey Report: Control Technology For Mine Assay Laboratories
197-14a 1995 Manufacturing In-Depth Survey Report: Control Technology for Manual Dye Weigh-Out Operations at Multi Color Industries Inc., Brooklyn, New York, July 26-27, August 22-26, and October 17-21, 1994
197-13a 1994 Manufacturing Survey Report: Control Technology for Manual Powder Weigh-Out Operations at Merck and Company, Wilson, North Carolina, June 7-8, 1994
197-12a 1993 Manufacturing In-Depth Survey Report: Control Technology For Manual Dye Weigh-Out Operations
197-11a 1993 Manufacturing In-Depth Survey Report: Control Technology for Manual Dye Weigh-Out Operations at The Glidden Company, Huron, Ohio, January 26-29, 1993
183-22 1999 Construction In-Depth Survey Report: Evaluation of an Automated Abrasive Blasting Machine at Marystown Shipyard, Marystown, Newfoundland, Canada, September 16-17, 1997
183-17a 1999 Construction In-Depth Survey Report: Control Technology for Removing Lead-Based Paint from Steel Structures: Chemical Stripping at Columbus, Ohio Bridge, Finishes, Inc., Columbus, Ohio, April 20, 21, 25, and June 21, 1994
183-16a 1995 Construction In-Depth Survey Report: Control Technology for Removing Lead-Based Paint from Steel Structures: Power Tool Cleaning at Muskingum County, Ohio, Bridge MUS-555-0567 and MUS-60-3360, Olympic Painting Company, Inc., Youngstown, Ohio, September 16-17, 1993
183-15a 1994 Construction In-Depth Survey Report: Control Technology for Removing Lead-Based Paint from Steel Structures: Chemical Stripping Using Caustic (Peel Away ST-1) at Williams Pipeline Terminal and Station, Marshall, Minnesota, September 8-11, 1992
183-14a 1994 Construction In-Depth Survey Report: Control Technology for Removing Lead-Based Paint from Steel Structures: Abrasive Blasting Inside Two Ventilated Containment Systems at Bridge Street and Shribner Street Overpass, Seaway Painting Company, Inc., Grand Rapids, Michiga
183-13a 1993 Construction In-Depth Survey Report: Control Technology for Removing Lead-Based Paint From Steel Structures: Abrasive Blasting Using Staurite XL in Containment at BP Oil Corporation, Lima, Ohio, September 23-25, 1992
183-12a 1993 Construction In-Depth Survey Report: Control Technology for Removing Lead-Based Paint from Steel Structures: Abrasive Blasting Using Steel Grit with Recycling at I-75 Bridge (Project 255-92) Corcon, Inc., Dayton, Ohio, July 22 and August 1, 6, 1992
181-12a 1994 Services In-Depth Survey Report: Ergonomic Interventions for the Soft Drink Beverage Delivery Industry at Pepsi-Cola Company, Dayton, Ohio, February 2, 1993 – May 6, 1993
181-11a 1992 Services Walk-Through Survey Report: Ergonomic Interventions For The Beverage Delivery Industry
179-21a 1994 Services In-Depth Survey Report: Evaluation of Spray Gun Technology for Occupational Exposure to Auto Paint Shop Hazards at DeVilbiss Automotive Refinishing Products, Maumee, Ohio, September 14-19, 1992, and July 6-8, 1993
179-18a 1993 Services In-Depth Survey Report: Control Technology for Autobody Report and Painting Shops at Team Chevrolet, Colorado Springs, Colorado, December 8-11, 1992
179-17a 1999 Services In-Depth Survey Report: Control Technology for Autobody Repair Shops: Small Parts Painting in a Downdraft Booth at BASF Corporation, Whitehouse, Ohio, September 23-26, 1997; December 11-12, 1997; and January 14-17, 1998
179-16a 1993 Services In-Depth Survey Report: Control Technology for Autobody Repair and Painting Shops at Cincinnati Collision Autobody Shop, Blue Ash, Ohio, July 27-30, 1992
179-15a 1993 Services In-Depth Survey Report: Control Technology for Autobody Repair and Painting Shops at Jeff Wyler Autobody Shop, Batavia, Ohio, June 16-19, and July 21, 1992
179-14a 1993 Services In-Depth Survey Report: Control Technology for Autobody Repair and Painting Shops at Valley Paint and Body Shop, Amelia, Ohio, May 6, 11-15, June 8, and October 15, 1992
179-13a 1993 Services In-Depth Survey Report: Control Technology for Autobody Repair and Painting Shops at Blue Ash Autobody Shop, Blue Ash, Ohio
179-12a 1992 Services Control Technology For Autobody Repair And Painting Shops
179-11a 1992 Services Survey Report: Control Technology for Autobody Repair and Painting Shops at Church Brother’s Collision Repair, Greenwood, Indiana, October 10-11, 1991
173-04b 1990 Services In-Depth Survey Report: Evaluation of a Ventilation System to Control Formaldehyde During Embalming at Cincinnati College of Mortuary Science, Cincinnati, Ohio, April 13-15 and April 20-22, 1987
172-14a 1991 Services In-Depth Survey Report: Control Technology for Small Business: Evaluation of Flexible Duct-Large Hood Ventilation for Radiator Repair at Hensley’s Radiator Service, Inc., Charlottesville, Virginia, September 5-6, 1990
172-12a 1991 Services In-Depth Survey Report: Control Technology for Small Business: Evaluation of a Ventilated Booth for Radiator Repair at Sims Radiator, Chamblee, Georgia, July 17-19, 1990
172-11a 1990 Services In-Depth Survey Report: Control Technology for Small Business: Evaluation of a Flexible Duct Ventilation System for Radiator Repair at A-1 Radiator, Reno, Nevada, June 26-28, 1989
171-38a 2006 Transportation, Warehousing, and Utilities An Evaluation of Catalytic Emission Controls to Prevent Carbon Monoxide Poisonings From Houseboat Generator Exhaust, Callville Bay Marina, Boulder City, Nevada, November 16-17, 2005
171-37a 2005 Transportation, Warehousing, and Utilities Evaluation of the Sideswipe™ Exhaust System to Reduce Carbon Monoxide Exposure During Motor Boating and Wake Surfing – Yosemite Lake, Merced, California, August 24-25, 2004
171-36a 2005 Transportation, Warehousing, and Utilities An Evaluation of Catalytic Emission Controls and Vertical Exhaust Stacks to Prevent Carbon Monoxide Poisonings from Houseboat Generator Exhaust, September 2005
171-35a 2004 Transportation, Warehousing, and Utilities Evaluation of the “Fresh Air Exhaust (TM)” Sytem to Reduce Carbon Monoxide Exposure During Motor Boating and Wake Surfing, may 24 and 25, 2004
171-34a2 2004 Transportation, Warehousing, and Utilities Follow Up Evaluation of Design Changes to a Houseboat Generator Exhaust Stack System, August 27, 2003
171-34a1 2004 Transportation, Warehousing, and Utilities An Evaluation of Factors That Might Influence Exhaust Stack Performance to Prevent Carbon Monoxide Poisonings from Houseboat Generator Exhaust. August 4-7, 2003
171-33a 2004 Services Survey Report: Evaluation of an Air Shower for Reducing Exposure to Carbon Monoxide at United States Port of Entry, Calexico, California, July-December 2002
171-32a 2003 Transportation, Warehousing, and Utilities An Evaluation of Vertical Exhaust Stacks and Aged Production Emission Control Devices to Prevent Carbon Monoxide Poisonings from Houseboat Generator Exhaust, September 30 to October 3, 2002
171-31a 2003 Transportation, Warehousing, and Utilities Carbon Monoxide Emissions and Exposures on Recreational Boats Under Various Operating Conditions – Lake Norman NC, May 13-16, 2002
171-29a 2002 Transportation, Warehousing, and Utilities An Evaluation of Side Exhaust and Prototype and Production Emission Control Devices to Prevent Carbon Monoxide Poisonings from Generator Exhaust on Houseboats, October 29 to Novemeber 1, 2001
171-28a 2001 Transportation, Warehousing, and Utilities In-Depth Survey Report: Comparison of a Dry Stack with Existing Generator Exhaust Systems for Prevention of Carbon Monoxide Poisonings on Houseboats at Callville Bay Marina, Lake Mead, Nevada, June 18-20, 2001
171-27a 2001 Transportation, Warehousing, and Utilities An Evaluation of an Emission Control Device, Exhaust Stack, and Interlock to Prevent Carbon Monoxide Poisonings of Individuals on Houseboats, June 18-21, 2001
171-26a 2001 Transportation, Warehousing, and Utilities An Evaluation of an Engineering Control to Prevent Carbon Monoxide Poisonings of Individuals on Houseboats, March 1, 2001
171-25a 2001 Transportation, Warehousing, and Utilities An Evaluation of an Engineering Control to Prevent Carbon Monoxide Poisonings of Individuals on Houseboats, February 6-8, 2001
171-22a 1994 Services Sentinel Event Notification System for Occupational Risks (SENSOR): In-Depth Survey Report: Control of Ethyl Methacrylate Exposures During the Application of Artificial Fingernails at Moore’s University of Hair Design, Cincinnati, Ohio, March 23-26 and Ma
171-21a 1993 Manufacturing In-Depth Survey Report: Evaluation of a Ventilation Control for Casting Cleaning in a Foundry at General Castings — Powers Street Facility, Cincinnati, Ohio, April 12 and May 25, 1993
171-18 1992 Manufacturing An Evaluation Of Exposure To Fungal Spores And Recommendations For Their Control In A Beet Sugar Refinery (Sensor)
171-17b 1990 Manufacturing Sentinel Event Notification System For Occupational Risks (Sensor): Recommendations For Control Of Silica Exposure
171-17a 1989 Manufacturing Walk-Through Survey Report: Control Technology Support For Sensor
171-16a 1989 Manufacturing Walk-Through Survey Report: Control Technology Support For Sensor
171-15a 1989 Manufacturing Walk-Through Survery Report: Conrol Technology Support For Sensor
171-14a 1989 Manufacturing Preliminary Survey Report: Control Technology Support For Sensor
171-13a 1988 Manufacturing Preliminary Survery Report: Control Technology Support For Sensor
171-12b 1989 Manufacturing Sentinel Event Notification System For Occupational Risks (Sensor): Recommendations For Control Of Silica Exposure
171-12a 1988 Manufacturing Preliminary Survey Report: Control Technology Support For Sensor
171-11c 1992 Manufacturing Sentinel Event Notification System For Occupational Risks (Sensor): Follow-Up Study For Control Of Silica Exposure
171-11b 1989 Manufacturing Sentinel Event Notification System For Occupational Risks (Sensor): Recommendations For Control Of Silica Exposure
171-05vv 2007 Transportation, Warehousing, and Utilities An Evaluation of Catalytic Emission Controls to Prevent Carbon Monoxide Poisonings from Houseboat Generator Exhaust, November 28-19, 2006
171-05ee2 2003 Transportation, Warehousing, and Utilities Carbon Monoxide Emissions and Exposures on Recreational Boats Under Various Operating Conditions – Lake Mead, NV and Lake Powell AZ, April 22-25, 2002
170-23a 2003 Services In-Depth Survey Report: Assisting Furniture Strippers in Reducing the Risks from Methylene Chloride Stripping Formulations at The Strip Joint, Inc., Redondo Beach, California, January 22, 1998, May 20-21, 1998
170-22a 2002 Services In-Depth Survey Report: Assisting Furniture Strippers in Reducing the Risk from Methylene Chloride Stripping Formulations at Sunset Strip, Inc., Huntington Beach, California, September 20-22, 1999
170-20a 1999 Services In-Depth Survey Report: Assisting Furniture Strippers in Reducing the Risk from Methylene Chloride Stripping Formulations at Los Angeles Stripping and Refinishing Center, Los Angeles, California, January 23, 1998
170-19a 1992 Services Walk-Through Survey Report: Control Of Methylene Chloride In Furniture Stripping
170-18a 1991 Services In-Depth Survey Report: The Control of Methylene Chloride in Furniture Stripping at Association for Retarded Citizens, Washington County Chapter, Inc., Meadow Lands, Pennsylvania, January 29-February 1, 1990 and March 12-16, 1990
170-17a 1992 Services In-Depth Survey Report: The Control of Methylene Chloride in Furniture Stripping at The J.M. Murray Center, Inc., Cortland, New York, April 16-20, 1990
170-16b 1990 Manufacturing In-Depth Survey Report: The Control of Methylene Chloride in Furniture Stripping at Kwick Kleen Industrial Solvents, Inc., Vicennes, Indiana, July 31-August 2, 1989
170-14a 1990 Services Walk-Through Survey Report: Control Of Methylene Chloride In Furniture Stripping
170-13c 2000 Services In-Depth Survey Report: Control of Methylene Chloride During Furniture Stripping at Tri-County Furniture Stripping, Cincinnati, Ohio, August 28-29, October 17, and November 25, 1997; March 20, April 2-3, June 2, June 13, June 15, and July 8-9, 1998; and M
170-13b 1992 Services In-Depth Survey Report: Control of Methylene Chloride in Furniture Stripping at Tri-County Furniture Stripping and Refinishing, Cincinnati, Ohio, September 11-13, 1991
170-12a 1990 Services Walk-Through Survey Report: Conrol Of Methylene Chloride In Furniture Stripping
170-11a 1990 Services Preliminary Survey Report: Control Of Methylene Chloride In Furniture Stripping
169-11 1988 Manufacturing In-Depth Survey Report: Design of Improved Workstations for Handling Dry Chemical Powders at B.F. Goodrich Company, Industrial Plastics Division, Marietta, Ohio, August 10-14 and August 17-21, 1987
167-11b 1988 Manufacturing In-Depth Survey Report: High-Velocity Low-Volume Exhaust of Manual Sanding Operations at Navistar, Columbus Plastics Plant, Columbus, Ohio, April 13-15, and April 20-22, 1987
166-12b 1990 Healthcare and Social Assistance In-Depth Survey Report: Control of Anesthetic Gases in Dental Operatories at University of California at San Francisco, Oral Surgical Dental Clinic, San Francisco, California, July 25-28, 1988
166-11b 1989 Healthcare and Social Assistance In-Depth Survey Report: Control of Anesthetic Gases in Dental Operatories at Children’s Hospital Medical Center, Dental Facility, Cincinnati, Ohio, June 25, 1977, April 21, 1988, and June 15, 1988
163-17a 1987 Manufacturing Preliminary Survey Report: Control Technology For Gallium Arsenide Processing
163-16a 1988 Manufacturing Preliminary Survey Report: Control Technology For Gallium Arsenide Processing
163-15b 1994 Manufacturing In-Depth Survey Report: Control Technology for Gallium Arsenide Processing at Morgan Semiconductor, Garland, Texas, March 23-26, 1987
163-14a 1987 Manufacturing Preliminary Survey Report: Control Technology For Gallium Arsenide Processing
163-13b 1989 Manufacturing In-Depth Survey Report: Control Technology for Gallium Arsenide Processing at M/A-COM, Lowell, Massachusetts, June 15-18,1987
163-13a 1987 Manufacturing Preliminary Survey Report: Control Technology For Gallium Arsenide Processing
163-12a 1987 Manufacturing Preliminary Survey Report: Control Technology For Gallium Arsenide Processing
156-69 2003 Services Survey Report: Evaluation of Ice Resurfacing Equipment and Ventilation in an Indoor Ice Arena, Lehigh Valley Ice Arena, Whitehall, Pennsylvania, October 17-18, 2002
156-03b 1988 Manufacturing In-Depth Survey Report: Recommendations for Control of Egg Containing Dusts and Mists at Siouxpreme Egg Products, Sioux Center, Iowa, March 23-26, 1987
155-14a 1986 Manufacturing Preliminary Survey Report: Control Technology For Filling Of Containers
155-13a 1986 Manufacturing Preliminary Survey Report: Control Technology For Filling Of Containers
155-12a 1986 Manufacturing Preliminary Survey Report: Control Technology For Filling Of Containers
154-12b 1988 Manufacturing In-Depth Survey Report: Control Technology for Falling Solids at Cincinnati Paint and Varnish, Cincinnati, Ohio, July 16, 28, and September 10, 1987
154-11a 1989 Manufacturing Study Report: Evaluation Of Dustiness Test Methods And Recommendations For Improved Dust Control
154-10 1987 Manufacturing Final Report: Control Technology For Falling Solids
152-22b 1988 Services In-Depth Survey Report: Evaluation of Brake Drum Service Controls at Cincinnati Gas and Electric Garages, Cincinnati, Evanston, and Monroe, Ohio, and Covington, Kentucky, October 1986 – May 1987
152-21b 1987 Services In-Depth Survey Report: Evaluation of Brake Drum Service Controls at Cincinnati Bell Maintenance Facility, Fairfax, Ohio, November 24, 1986-February 5, 1987
152-20b 1987 Services In-Depth Survey Report: Evaluation of Brake Drum Service Control at United States Postal Service Vehicle Maintenance Facility, Nashville, Tennessee, October 27-30, 1986
152-19a 1987 Services Preliminary Survey Report: Evaluation Of Brake Drum Service Controls
152-18b 1987 Services In-Depth Survey Report: Control Technology for Brake Drum Service Operations at Ohio Department of Transportation, Maintenance Facility, Lebanon, Ohio, July 29-October 3, 1986
152-18a 1986 Services Preliminary Survey Report: Evaluation Of Brake Drum Service Controls
152-17 1986 Services Preliminary Survey Report: Control Technology For Brake Lining
152-15a 1988 Services Preliminary Survey Report: Evaluation Of Brake Drum Service Controls
152-14a 1985 Services Preliminary Survey Report: Evaluation Of Brake Drum Service Controls
152-13a 1988 Services Preliminary Survey Report: Evaluation Of Brake Drum Service Controls
152-11b 1987 Services In-Depth Survey Report: Evaluation of Brake Drum Service Controls at United States Postal Service Vehicle Maintenance Facility, Louisville, Kentucky, February 1987
150-11a 1985 Manufacturing Survey Report: Control Technology for FRP Tank Manufacture at FMC Corporation, Jonesboro, Arkansas, June 17, 1985
149-33b 1985 Manufacturing In-Depth Survey Report: Control Technology for Manual Transfer of Chemical Powders at the B.F. Goodrich Company, Marietta, Ohio, December 9-12, 1985
149-31 1985 Manufacturing Preliminary Survey Report: Control Technology For Manual Transfer Of Chemical Powders
149-25a 1984 Manufacturing Preliminary Survey Report: Control Technology For Manual Transfer Of Chemical Powders
149-24a 1984 Manufacturing Preliminary Survey Report: Control Technology For Manual Transfer Of Chemical Powders
149-23a 1984 Manufacturing Preliminary Survey Report: Control Technology For Manual Transfer Of Chemical Powders
149-22a 1984 Manufacturing Preliminary Survey Report: Control Technology For Manual Transfer Of Chemical Powders
149-21a 1984 Manufacturing Walk-Through Survey Report: Control Technology For Manual Transfer Of Chemical Powders
149-20a 1984 Manufacturing Preliminary Survey Report: Control Technology For Manual Transfer Of Chemical Powders
149-19a 1984 Manufacturing Preliminary Survey Report: Control Technology For Manual Transfer Of Chemical Powders
149-18a 1984 Manufacturing Preliminary Survey Report: Control Technology For Manual Transfer Of Chemical Powders
149-15a 1984 Transportation, Warehousing, and Utilities Preliminary Survey Report: Control Technology For Manual Transfer Of Chemical Powders
148-16a 1984 Manufacturing Preliminary Survey Report: Control Technology For New Materials
148-15a 1984 Manufacturing Preliminary Survey Report: Control Technology For New Plastics Processes
148-14b 1984 Manufacturing In-Depth Survey Report: Control Technology for New Plastics Processes at Herman Miller Company, Holland, Michigan, May 1, 1984
148-12a 1984 Manufacturing Preliminary Survey Report: Control Technology For New Platics Processes
148-11a 1984 Manufacturing Preliminary Survey Report: Control Technology For New Plastics Processes
147-22a 1991 Construction In-Depth Survey Report: Evaluation of the Custom Fabricated Negative Air Glove Bag During the Removal of Asbestos-Containing Pipe Lagging at The University of Massachusetts, Amherst, Massachusetts, July 26, 1988 and August 21-26, 1988
147-21a 1991 Construction In-Depth Survey Report: Evaluation of the Aero-Pipe Capsule (Negative Pressure Glove Bag) During the Removal of Asbestos-Containing Pipe Lagging at the Dore and Associates Contracting, Inc., Bay City, Michigan, and at Asbestos Removal Site in Dearborn, Mi
147-19d 1987 Construction In-Depth Survey Report: Control Technology for Asbestos Removal at Winton Place Elementary School, Cincinnati, Ohio, June 4-July 18, 1985
147-19c 1987 Construction In-Depth Survey Report: Control Technology for Asbestos Removal at Bloom Middle School, Cincinnati, Ohio, June 4-July 9, 1985
147-19b 1987 Construction In-Depth Survey Report: Control Technology for Asbestos Removal at Sands Elementary School, Cincinnati, Ohio, June 4-July 10, 1985
147-19a 1987 Construction In-Depth Survey Report: Control Technology For Asbestos Removal
147-17a 1985 Construction Preliminary Survey Report: Control Technology For Asbestos Removal Industry
147-16a 1985 Construction Preliminary Survey Report: Control Technology For Asbestos Removal Industry
147-15a 1985 Construction Preliminary Survey Report: Control Technology For Asbestos Removal Industry
147-14a 1985 Construction Walk-Through Survey Report: Control Technology For Asbestos Removal Industry
147-13a 1985 Construction Walk-Through Survey Report: Control Technology For Asbestos Removal Industry
147-12a 1985 Construction Walk-Through Survey Report: Control Technology For Asbestos Removal Industry
147-11a 1985 Construction Walk-Through Survey Report: Control Technology For Asbestos Removal Industry
146-18b 1985 Healthcare and Social Assistance In-Depth Survey Report: Control Technology for Ethylene Oxide Sterilization in Hospitals at Shriners Hospitals for Crippled Children Burns Institute – Cincinnati Unit, Cincinnati, Ohio, March 18-22, 1985
146-17b 1985 Healthcare and Social Assistance In-Depth Survey Report: Control Technology for Ethylene Oxide Sterilization in Hospitals at St. Francis/St. George Hospital, Cincinnati, Ohio, January 21-25, 1985
146-16a 1985 Healthcare and Social Assistance Preliminary Survey Report: Control Technology For Ethylene Oxide Sterilization In Hospitals
146-15b 1985 Healthcare and Social Assistance In-Depth Survey Report: Control Technology for Ethylene Oxide Sterilization in Hospitals at Wooster Community Hospital, Wooster, Ohio, February 4-8, 1985
146-15a 1985 Healthcare and Social Assistance Preliminary Survey Report: Control Technology For Ethylene Oxide Sterilization In Hospitals
146-14b 1985 Healthcare and Social Assistance In-Depth Survey Report: Control Technology for Ethylene Oxide Sterilization in Hospitals at Euclid General Hospital, Euclid, Ohio, September 24-28, 1984
146-14a 1984 Healthcare and Social Assistance Preliminary Survey Report: Control Technology For Ethylene Oxide Sterilization In Hospitals
146-13b 1985 Healthcare and Social Assistance In-Depth Survey Report: Control Technology for Ethylene Oxide Sterilization in Hospitals at Bronson Methodist Hospital, Kalamazoo, Michigan, February 25 – March 1, 1985
146-13a 1984 Healthcare and Social Assistance Preliminary Survey Report: Control Technology For Ethylene Oxide Sterilization In Hospitals
146-12c 1986 Healthcare and Social Assistance In-Depth Survey Report: Modified Control Technology for Ethylene Oxide Sterilization in Hospitals at Community MedCenter Hospital, Marion, Ohio, October 7-11, 1985
146-12b 1985 Healthcare and Social Assistance In-Depth Survey Report: Control Technology for Ethylene Oxide Sterilization in Hospitals at Community Medcenter Hospital, Marion, Ohio, October 29-November 2, 1984
146-11b 1985 Healthcare and Social Assistance In-Depth Survey Report: Control Technology for Ethylene Oxide Sterilization in Hospitals at Bethesda Hospital, Cincinnati, Ohio, June 11-15, 1984
145-21a 1983 Services Walk-Through Survey Report: Control Technology For Airline Maintenance Facility At: United Airlines Maintenance Facility San Francisco, California
145-20a 1983 Services Walk-Through Survey Report: HVLV Control Technology For Aircraft Radome And Canopy Repair At: Naval Air Rework Facility Alameda Naval Air Station Alameda, California
145-19a 1984 Manufacturing Walk-Through Survey Report: HVLV Control Technology For Welding Gun At: Kaiser Aluminum and Chemical Corporation Drainage Products Operations Sacramento, California 95838
145-17a 1983 Services Walk-Through Survey Report: HVLV Control Technology For Auto Body Shop Sanding At: Kay Parks Autobody Rebuild Inc. Tacoma, Washington
145-16a 1983 Manufacturing Walk-Through Survey Report: HVLV Control Technology For Graphite Composite Trimming At: Boeing Commercial Airplane Company Fabrication Division Auburn, Washington
145-15a 1983 Manufacturing Walk-Through Survey Report: HVLV Control Technology For Machining And Sanding At: Kenworth Truck Company Seattle, Washington
145-12a 1983 Manufacturing Walk-Through Survey Report: Control Technology For Grinding And Cutting At Fairchild Republic Co. Farmingdale, New York
144-22b 1985 Manufacturing In-Depth Survey Report: Weighing and Batching at BF Goodrich Company, Akron, Ohio, October 15-18, 1984
144-21a 1984 Manufacturing In-Depth Survey Report: Macawber Engineering, Inc., Maryville, Tennessee, April 10-11, 1984
144-20 1984 Manufacturing Walk-Through Survey Report: Control Technology For Solid Materials Handling At GNB Batteries St. Paul, Minnesota
144-19 1983 Manufacturing An Evaluation Of Control Technology For Bag Opening, Emptying And Disposal – “The Self Contained Filter/Bag Dump Station” Manufactured By The Young Industries Inc., Muncy, Pa. 17756
144-18b 1985 Manufacturing In-Depth Survey Report: Control Technology of Solid Material Handling, Phase I – Bag Opening, Emptying, and Disposal at Rohm and Haas Delaware Valley, Inc.-Bristol Plant, Bristol, Pennsylvania, June 4-7, 1984
144-18 1984 Manufacturing Preliminary Survey Report: Of Control Technology Assessment Of Solid Materials Handling, Phase I Bag Opening, Emptying, And Disposal
144-16 1983 Manufacturing Walk-Through Survey Report: Control Technology For Bag Opening, Emptying, And Disposal
144-15b 1983 Manufacturing In-Depth Survey Report: Control Technology for Richard Klinger Company, Sidney, Ohio, August 1-4, 1983
144-14b 1984 Manufacturing In-Depth Survey Report: Control Technology for Solids Material Handling at General Motors Corporation Inland Division, Vandalia, Ohio, November 16-17 and November 28-December 1, 1983
144-13 1984 Manufacturing Walk-Through Survey Report: Control Technology For Bag Opening, Emptying, And Disposal
144-11b 1984 Manufacturing In-Depth Survey Report: Solid Materials Handling Project at 3M Company, Grove City, Ohio, July 24-27 and November 7-11, 1983
143-19a 1983 Healthcare and Social Assistance Control Technology Feasibility Study: The Use of Engineering Controls in Hospitals. Preliminary Survey Report of St. Francis – St. George Hospital, Cincinnati, Ohio, May 11, 1983
143-12a 1983 Healthcare and Social Assistance Control Technology Feasibility Study: The Use of Engineering Controls in Hospitals. Preliminary Survey Report of Veteran’s Administration Medical Center, Cincinnati, Ohio, September 29, 1982
129-19a 1980 Manufacturing Pesticides Engineering Control Technology Assessment Survey, Plant M-5 at Stauffer Chemical, San Gabriel, Lousiana, December 1979
129-16a 1980 Manufacturing Pesticides Engineering Control Technology Assessment Survey, Plant J-1 at Rohm and Haas, Philadelphia, Pennsylvania, May 14-18, 1979
129-14a 1980 Manufacturing Pesticides Engineering Control Technology Assessment Survey, Union Carbide, Plant E-2, Woodbine, Georgia, January 1978
120-13a 1981 Manufacturing In-Depth Survey Report: Silica Flour Dust During Packing, Transfer and Shipping at Pennsylvania Glass Sand Corporation, Berkeley Springs, West Virginia, July 15-16, 1980
120-12a 1981 Manufacturing In-Depth Survey Report: Silica Flour Dust During Packing, Transfer and Shipping at the Central Silica Company (Glass Rock Plant), Glass Rock, Ohio, August 5-6, 1980
120-11a 1981 Manufacturing In-Depth Survey Report: Silica Flour Dust During Packing, Transfer and Shipping at Ottawa Silica Company, Ottawa, Illinois, June 17-19, 1980
119-31a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-30a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-29a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-28a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-27a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-26a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-24a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-23a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-22a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-21a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-20a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-19a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-18a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-17a 1981 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-15a 1980 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-14a 1980 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-12a 1981 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
119-11a 1982 Transportation, Warehousing, and Utilities Control Technology Assessment For Coal Gasification And Liquefaction Processes
116-19b 1986 Manufacturing In-Depth Survey Report: Control Technology Assessment of Enzyme Fermentation Processes at Gist-Brocades USA, Inc., Kingstree, South Carolina, June 24-July 3, 1985
116-19a 1984 Manufacturing Walk-Through Survey Report: Control Technology For Fermentation Processes At Gist-Brocades USA, Inc. Kingstree, South Carolina
116-18a 1985 Manufacturing Walk-Through Survey Report: Control Technology For Fermentation Processes At Wyeth Laboratories, Inc. West Chester, Pennsylvania
116-16b 1986 Manufacturing In-Depth Survey Report: Control Technology Assessment of Enzyme Fermentation Processes at Miles Laboratories, Inc., Elkhart, Indiana, November 18-22, 1985
116-16a 1984 Manufacturing Walk-Through Survey Report: Control Technology For Fermentation Processes At Miles Laboratories, Inc. Elkhart, Indiana
116-15b 1986 Manufacturing In-Depth Survey Report: Control Technology Assessment Of Enzyme Fermentation Processes At Novo Biochemical Industries, Inc. Franklinton, North Carolina
116-15a 1986 Manufacturing  In-Depth Survey Report: Control Technology Assessment of Enzyme Fermentation Processes at Novo Biochemical Industries, Inc., Franklinton, North Carolina, September 9-16, 1986
116-14a 1983 Manufacturing Walk-Through Survey Report: Control Technology For Fermentation Processes At Genencor, Inc. Bristol, Pennsylvania
116-13a 1982 Manufacturing Control Technology Assessment Of Fermentation Processes Walk-Through Survey Report Of Schoenling Brewery Company Cincinnati, Ohio
116-04 1987 Manufacturing Emission Characteristics Of The Evaporative Pattern Casting Process
115-32a 1984 Manufacturing Preliminary Survey Report Of Control Technology For Microelectronics Industry At Airco Corporation Phoenix, Arizona
115-28a 1984 Manufacturing Preliminary Control Technology Survey on Rockwell International Corporation Electronic Devices Division Newport Beach, California
115-26a 1984 Manufacturing Preliminary Control Technology Survey on Micro Power Systems, Inc. Santa Clara, California
115-24b 1984 Manufacturing In-Depth Survey Report: Control Technology for the Microelectronics Industry at NEC Electronics USA, Mountain View, California, April 11-13, 1983
115-23 1983 Manufacturing Preliminary Conrol Technology Survey on Comdial Semiconductor, Inc. 1230 Bordeaux Drive Sunnyvale, California 94086
115-20b 1984 Manufacturing In-Depth Survey Report: Control Technology for the Microelectronics Industry at Fairchild Semiconductor, South Portland, Maine, July 26-August 3, 1982
115-19a 1983 Manufacturing Preliminary Control Technology Survey on Datel-Intersil Corporation Mansfield, Massachusetts
115-17a 1984 Manufacturing Preliminary Survey Report on Control Technology For Integrated Circuit Fabrication at Honeywell Optoelectronics Division Richardson, Texas
115-16b 1984 Manufacturing In-Depth Survey Report: Control Technology for the Microelectronics Industry at United Technologies Corporation’s Mostek Facility, Carrollton, Texas, December 7-10, 1983
115-16a 1982 Manufacturing Preliminary Control Technology Survey Report United Technologies Mostek 1215 West Crosby Carrollton, Texas 75006
115-14a 1983 Manufacturing Preliminary Control Technology Survey of Motorola, Inc. 5005 East McDowell Road Phoenix, Arizona 85008
115-12b 1984 Manufacturing In-Depth Survey Report: Control Technology for Microelectronics Industry at Xerox Corporation Microelectronics Center, El Segundo, California, November 15-18, 1982
114-22a 1981 Manufacturing Preliminary Plant Visit Industrial Hygiene Report
114-21a 1982 Manufacturing Preliminary Plant Visit Industrial Hygiene Report
114-20b 1983 Manufacturing Detailed Industrial Hygiene Survey Formaldehyde Production: E.I. DuPont DeNemours and Co., Grasselli Plant, Linden, New Jersey, October 25-29, 1982 and June 13-16, 1983
114-20a 1982 Manufacturing Preliminary Plant Visit Industrial Hygiene Report
114-19b 1983 Manufacturing Detailed Industrial Hygiene Survey Formaldehyde Production: Celanese Chemical Company, Inc., Bishop, Texas, October 11-15, 1982
114-17a 1982 Manufacturing Preliminary Plant Visit Industrial Hygiene Report
114-16a 1982 Manufacturing Preliminary Plant Visit Industrial Hygiene Report
114-15b 1983 Manufacturing Production, Georgia-Pacific Corporation, Albany, Oregon, July 19-23, 1982
114-14b 1983 Manufacturing Production, Reichhold Chemicals, Inc., Hampton, South Carolina, August 24-27, 1982
114-04 1984 Manufacturing A Survey of Health Hazard Control Systems for Formaldehyde Production Facilities
113-14a 1982 Manufacturing Preliminary Survey Report: Solid Material Sampling Operations At Cabot Berylco Beryllium Alloy Plant Reading, Pennsylvania
112-24a 1982 Mining Walk-Thru Survey Report Of Moly Corp’s Mountain Pass Operation At Mountain Pass, California
112-23b 1983 Manufacturing In-Depth Survey Report: Control Technology for Bag Filling Operations at Manville Products Corporation, Lompac, California, January 18-21, 1983
112-22a 1982 Manufacturing Walk-Through Survey Report At Minerals Division/Grefco, Inc. Lompoc, California
112-21b 1984 Manufacturing In-Depth Survey Report: Control Technology for Bag Filling Operations at Union Carbide Corporation, King City, California, January 24-28, 1983
112-21a 1982 Manufacturing Walk-Through Survey Report At Union Carbide Corporation King City, California
112-17a 1982 Manufacturing Preliminary Site Survey Report On Frit Bagging Operation At Chi-Vit Corporation Urbana, Ohio
112-15a 1982 Manufacturing Walk-Thru Survey Report Of The Hammond Lead Products Inc. Lead Pigments And Chemicals At Hammond, Indiana
112-14a 1982 Manufacturing Walk-Through Survey Report Of The Bagging Operation At Tennessee Valley Authority’s National Fertilizer Development Center Muscle Shoals, Alabama
112-13b 1983 Manufacturing In-Depth Survey Report: Control Technology for a Dry Chemical Bagging and Filling Operation at Monsanto (Monsanto Agricultural Products Company), Muscatine, Iowa, May 19-20, 1982
112-13a 1981 Manufacturing Walk Through Survey Report Of The Pesticide/Herbicide Bagging Operation At Monsanto Agricultural Products Company, An Operating Unit Of Monsanto Company At Muscatine, Iowa
112-11a 1981 Manufacturing Walk-Through Survey Report Of The Talc Bagging Operation At Cyprus Industrial Minerals Company Three Forks, Montana
111-16a 1981 Mining Preliminary Control Technology Assessment Of Day Mines, Inc. Leadville, Colorado
111-15a 1981 Mining Preliminary Control Technology Assessment Of Standard Metals Corporation Silverton, Colorado
111-14a 1981 Mining Preliminary Control Technology Assessment Of Ozark Lead Company Sweetwater, Missouri
111-13b 1982 Mining In-Depth Survey Report: Amax Lead Company of Missouri, Buick, Missouri, February 15-17, 1982
111-13a 1981 Mining Preliminary Control Technology Assessment Of Amax Lead Company of Missouri Buick, Missouri
111-12b 1982 Mining In-Depth Survey Report: Cominco American, Inc., Bixby, Missouri, February 11-12, 1982
111-12a 1981 Mining Preliminary Control Technology Assessment Of Cominco American, Inc. Bixby, Missouri
111-11b 1982 Mining In-Depth Survey Report: St. Joe Minerals Corporation, Viburnbum, Missouri, February 9-10, 1982
110-30a 1983 Manufacturing Preliminary Control Technology Assessment Of Stark Ceramics Inc. Canton, Ohio
110-29a 1983 Manufacturing Preliminary Survey Report: Control Technology For The Ceramics Industry At Ohio Brass Company Barberton, Ohio
110-28a 1983 Manufacturing Preliminary Survey Report: Control Technology For The Ceramics Industry At American Standard Corporation Wauregan, Connecticut
110-27a 1983 Manufacturing Preliminary Survey Report: Control Technology For The Ceramic Industry At Acme Brick Company Malvern, Arkansas
110-26a 1983 Manufacturing Preliminary Survey Report: Control Technology For The Ceramic Industry At Oklahoma Brick Corporation Muskogee, Oklahoma
110-25b 1983 Manufacturing In-Depth Survey Report: Control Technology for the Ceramics Industry at American Olean Tile Company, Jackson, Tennessee, April 26-28, 1983
110-25a 1983 Manufacturing Walk-Through Survey Report: Control Technology For The Ceramic Industry At American Olean Tile Company Jackson, Tennessee
110-24b 1983 Manufacturing In-Depth Survey Report: Control Technology for the Ceramics Industry at American Olean Tile Company, Lewisport, Kentucky, November 15-17, 1982
110-24a 1983 Manufacturing Preliminary Control Technology Assessment Of American Olean Tile Company Lewisport and Cloverport, Kentucky
110-23a 1983 Manufacturing Walk-Through Survey Report: Control Technology For The Ceramic Industry At Can-Clay Corporation Cannelton, Indiana
110-21a 1983 Manufacturing Preliminary Control Technology Assessment Of Whitacre-Greer Fireproofing Company Waynesburg, Ohio
110-20a 1983 Manufacturing Preliminary Control Technology Assessment Of Crane Company Ferguson, Kentucky
110-17a 1983 Manufacturing Preliminary Control Technology Assessment Of Louisville Fire Brick Company Grahn, Kentucky
110-16a 1982 Manufacturing Preliminary Control Technology Assessment Of Mansfield Sanitary, Incorporated Perrysville, Ohio
110-15a 1982 Manufacturing Preliminary Control Technology Assessment Of The Belden Brick Company Sugarcreek, Ohio 44681
110-14a 1982 Manufacturing Preliminary Control Technology Assessment Of The Cambridge Tile Manufacturing Company Cincinnati, Ohio
110-13a 1981 Manufacturing Preliminary Control Technology Assessment Of Didier Taylor Refractories Corporation South Port, Kentucky
110-12b 1983 Manufacturing In-Depth Survey Report: Control Technology for the Ceramics Industry at Didier Taylor Refractories Corporation, Newtown, Ohio, July 13-15, 1982
110-12a 1981 Manufacturing Preliminary Survey Report Didier Taylor Refractories Corporation Plant Newtown, Ohio
110-11a 1981 Manufacturing Preliminary Survey Report The Hall China Company East Liverpool, Ohio
110-04b 1984 Manufacturing Assessment Of Dust Control Technology For Selected Ceramic Production Processes
110-04 1984 Manufacturing Assessment Of Dust Control Technology For Selected Ceramic Production Processes
109-34a 1982 Manufacturing Mercury Control Technology Assessment Study
109-33a 1982 Manufacturing Mercury Control Technology Assessment Study
109-32a 1982 Manufacturing Mercury Control Technology Assessment Study
109-31b 1982 Manufacturing In-Depth Survey Report: Mercury Control Technology Assessment Study at Wiring Devices of Puerto Rico, Ponce, Puerto Rico, March 16-18, 1982
109-30a 1982 Manufacturing Mercury Control Technology Assessment Study
109-29b 1982 Manufacturing In-Depth Survey Report: Mercury Control Technology Assessment Study at D.F. Goldsmith Chemical and Metal Corporation, Evanston, Illinois, May 4-6, 1982
109-28a 1982 Manufacturing Mercury Control Technology Assessment Study
109-27a 1982 Manufacturing Mercury Control Technology Assessment Study
109-26a 1982 Manufacturing In-Depth Survey Report: Mercury Control Technology Assessment Study at International Minerals and Chemicals Corp., Chemicals Group, Orrington, Maine, March 25-26, 1982
109-25a 1982 Manufacturing In-Depth Survey Report: Mercury Control Technology Assessment Study at McDermitt Mine, McDermitt, Nevada, February 9-10, 1982
109-24b 1982 Manufacturing In-Depth Survey Report: Mercury Control Technology Assessment Study at Oak-Mitsui Corporation, Hoosick Falls, New York, February 17-18, 1982
109-23b 1982 Healthcare and Social Assistance In-Depth Survey Report: Mercury Control Technology Assessment Study at Veterans Administration Medical Center Dental Services Clinic, Salt Lake City, Utah, January 11-12, 1982
109-22a 1982 Manufacturing In-Depth Survey Report: Mercury Control Technology Assessment Study at North American Philips Lighting Company, Lynn, Massachusetts, April 13-15, 1982
109-21a 1982 Manufacturing Mercury Control Technology Assessment Study
109-20a 1981 Manufacturing Mercury Control Technology Assessment Study
109-19b 1982 Manufacturing In-Depth Survey Report: Mercury Control Technology Assessment Study at Cosan Chemical Corporation, Carlstadt, New Jersey, July 16, 1981 and June 16-17, 1982
109-19a 1981 Manufacturing Mercury Control Technology Assessment Study
109-18a 1982 Manufacturing Mercury Control Technology Assessment Study
109-17b 1982 Healthcare and Social Assistance In-Depth Survey Report: Mercury Control Technology Assessment Study at Louisiana State University, School of Dentistry, New Orleans, Louisiana, April 27-28, 1981
109-16a 1981 Manufacturing Mercury Control Technology Assessment Study
109-15a 1981 Manufacturing Mercury Control Technology Assessment Study
109-14a 1982 Manufacturing Mercury Control Technology Assessment Study
109-13b 1982 Manufacturing In-Depth Survey Report: Mercury Control Technology Assessment Study at Sybron/Taylor Medical Products Division, Arden, North Carolina, March 23-24, 1981 and October 20-22, 1981
109-12b 1982 Manufacturing In-Depth Survey Report: Mercury Control Technology Assessment Study at Jay Instruments and Specialties Company, Cincinnati, Ohio, March 4-5, 1981
109-11b 1982 Manufacturing In-Depth Survey Report: Mercury Control Technology Assessment Study at Duracell, USA, Lexington, North Carolina, June 22-23, 1982
109-04 1983 Manufacturing A Survey of Health Hazard Control Systems for Mercury Use and Processing
108-27b 1984 Manufacturing In-Depth Survey Report: Control Technology for Formaldehyde Emissions at Dixie Furniture Plant, Lexington, North Carolina, November 15-19, 1982
108-26a 1983 Manufacturing Preliminary Survey Report: Control Technology For Formaldehyde Emissions At Baker Furniture Company Mocksville, North Carolina
108-25a 1983 Manufacturing Walk-Through Survey Report: Control Technology For Adhesives At National Veneer Plant Broyhill Furniture Industries, Inc. Lenoir, North Carolina
108-24a 1983 Manufacturing Preliminary Survey Report: Control Technology For Formaldehyde Emissions At Drexel Heritage Plant 60 Morganton, North Carolina
108-23a 1982 Manufacturing Preliminary Survey Report: Control Technology For Formaldehyde Emissions At Hoosier Panel New Albany, Indiana
108-22a 1983 Manufacturing Walk-Through Survey Report: Control Technology For Adhesive Use At Drew Shoe Plant Lancaster, Ohio
108-21a 1982 Manufacturing Preliminary Survey Report: Converse Shoe Plant Lumberton, North Carolina
108-20a 1982 Manufacturing Preliminary Survey Report: Lockheed Corporation California Division Burbank, California
108-19a 1981 Manufacturing Preliminary Survey Report: Particleboard and Plywood Plants Springfield Wood Products Facility Weyerhaeuser, Inc. Springfield, Oregon
108-18a 1982 Manufacturing Preliminary Survey Report: Fiberboard Plant Medford Corporation Medford, Oregon
108-17a 1982 Manufacturing Preliminary Survey Report: Particleboard Plant Timber Products Company Medford, Oregon
108-16a 1982 Manufacturing Preliminary Survey Report: Chrysler Corporation Adhesive Operations: Eldon Axle Plant Sterling Stamping Plant Jefferson Ave Assembly Plant
108-15a 1982 Manufacturing Preliminary Survey Report: Steelcase, Incorporated Grand Rapids, Michigan
108-14a 1982 Manufacturing Preliminary Survey Report: Bell Helicopter Textron Plant 1 Fort Worth, Texas
108-13b 1984 Manufacturing In-Depth Survey Report: Control Technology for Formaldehyde Emissions at Hillcrest Veneer Plant, High Point, North Carolina, September 20-24, 1982
108-13a 1981 Manufacturing Preliminary Survey Report: Hillcrest Veneer Plant Burlington Furniture Industries, Inc. High Point, North Carolina
108-12a 1982 Manufacturing Preliminary Survey Report: Karastan Rug Mill Fieldcrest Mills, Inc. Eden, North Carolina
108-11a 1981 Manufacturing Walk-Through Survey Report: Monsanto Plastics and Resins Company Phenol/Formaldehyde Resin Facility Port Plastics Plant River Road Addyston, Ohio
107-22a 1984 Manufacturing In-Depth Survey Report: Control Technology for Fiber Reinforced Plastics Industry at AMF Hatteras Yachts, New Bern Division, New Bern, California, September 9, 1983
107-17b 1983 Manufacturing In-Depth Survey Report: Control Technology for Fiber Reinforced Plastics Industry at Philips Industries Incorporated, Lasco Division, Elizabethtown, Pennsylvania, June 15, 1983
107-14b 1983 Manufacturing In-Depth Survey Report: Viking Yacht Company, New Gretna, New Jersey, July 12-16, 1982
107-13b 1983 Manufacturing In-Depth Survey Report: Hatteras Yachts, Highpoint, North Carolina, September 7-9, 1982
107-12a 1982 Manufacturing Walk-Through Survey Report: Of Pearson Yachts Company Portsmouth, Rhode Island
107-11b 1982 Manufacturing In-Depth Survey Report: Glas Ply Boat Company, Marysville, Washington, November 30-December 3, 1981
107-06 1984 Manufacturing Control Of Styrene Vapor During The Manufacture Of Fiber-Reinforced Plastics Small Parts
106-20a 1981 Services Preliminary Control Technology Assessment Of Advance Plating Company Ft. Worth, Texas
106-19a 1982 Manufacturing In-Depth Survey Report: U.S. Chrome, Fond DuLac, Wisconsin, September 14-17, 1981
106-18b 1982 Manufacturing In-Depth Survey Report: Control Technology for Trans World Airlines Maintenance Facility, Kansas City, Missouri, October 27-29, 1981
106-18a 1982 Manufacturing Preliminary Control Technology Assessment Of TWA Maintenance Facility Kansas City, Missouri
106-17b 1982 Manufacturing In-Depth Survey Report: American Airlines Plating Facility, Tulsa, Oklahoma, December 7-10, 1981
106-17a 1981 Manufacturing Preliminary Survey Report: Plating Shop American Airlines Maintenance and Engineering Center Tulsa International Airport Tulsa, Oklahoma
106-16a 1981 Manufacturing Preliminary Survey Report: Plating Shop Braniff Airways Love Field Dallas, Texas
106-15a 1982 Manufacturing In-Depth Survey Report: Valley Chrome Platers, Bay City, Michigan, April 27-May 1, 1981
106-14b 1982 Manufacturing In-Depth Survey Report: Electrocoatings, Houston, Texas, August 11-13, 1981
106-14a 1981 Manufacturing Preliminary Control Technology Assessment Of Electro-Coatings, INC. Houston, Texas
106-13a 1982 Manufacturing In-Depth Survey Report: Sodus Hardchrome, Inc., Sodus, Michigan, February 10-12, 1981
106-12a 1982 Manufacturing In-Depth Survey Report: Greensboro Industrial Plating, Greensboro, North Carolina, January 26-30, 1981
106-11a 1982 Manufacturing In-Depth Survey Report: Honeywell, Inc., Minneapolis, Minnesota, August 11-15, 1980
105-13a 1983 Manufacturing In-Depth Survey Report: Ortho Pharmaceuticals, Raritan, New Jersey, June 13-17, 1983
105-12a 1983 Manufacturing In-Depth Survey Report: Control Technology Assessment of Unit Operations Employed in Oral Contraceptive Tablet-Making Operations at Mead Johnson and Company, Evansville, Indiana, February 7-11, 1983
103-21a 1982 Services In-Depth Survey Report: Control Technology Assessment of Hazardous Waste Disposal Operations in Chemicals Manufacturing at San Juan Cement Company, Dorado, Puerto Rico, November 1981
103-20 1983 Manufacturing Control Technology Assessment Of Hazardous Waste Disposal Operations In Chemicals Manufacturing
103-19b 1984 Manufacturing In-Depth Survey Report: Control Technology Assessment of Hazardous Waste Disposal Operations in Chemicals Manufacturing at Tennessee Eastman Company, Kingsport, Tennessee, November 8-11, 1982
103-19a 1984 Manufacturing Control Technology Assessment Of Hazardous Waste Disposal Operations In Chemicals Manufacturing
103-18a 1982 Manufacturing Control Technology Assessment Of Hazardous Waste Disposal Operations In Chemicals Manufacturing
103-17a 1982 Manufacturing Control Technology Assessment Of Hazardous Waste Disposal Operations In Chemicals Manufacturing
103-16a 1982 Manufacturing Control Technology Assessment Of Hazardous Waste Disposal Operations In Chemicals Manufacturing
103-15b 1984 Manufacturing In-Depth Survey Report: Control Technology Assessment of Hazardous Waste Disposal Operations in Chemicals Manufacturing at E.I. DuPont de Nemours and Company, Chamber Works Incinerator, Deepwater, New Jersey, October 18-21, 1982
103-15a 1984 Manufacturing Control Technology Assessment Of Hazardous Waste Disposal Operations In Chemicals Manufacturing
103-12a 1982 Manufacturing Control Technology Assessment Of Hazardous Waste Disposal Operations In Chemicals Manufacturing
103-11b 1984 Manufacturing In-Depth Survey Report: Control Technology Assessment of Hazardous Waste Disposal Operations in Chemicals Manufacturing at 3M Company Chemolite Incinerator, Cottage Grove, Minnesota, September 13-16, 1982
103-11a 1982 Manufacturing Control Technology Assessment Of Hazardous Waste Disposal Operations In Chemicals Manufacturing
102-14a 1982 Manufacturing Preliminary Site Visit Report Farmer’s Valley Refinery Control Technology Assessment Of Petroleum Refinery Operations
102-12a 1982 Manufacturing Preliminary Site Visit Report Cherry Point Refinery Control Technology Assessment Of Petroleum Refinery Operations
101-22 1984 Manufacturing Walk-Through Survey Report: Control Technology For Chemical Batch Unit Operations
101-21 1983 Manufacturing Walk-Through Survey Report: Control Technology For Chemical Batch Unit Operations
101-20a 1984 Manufacturing Preliminary Survey Report: Occupational Hazard Control Options For Chemical Process Unit Operations
101-19a 1983 Manufacturing Preliminary Survey Report: Control Technology For Chemical Process Unit Operations
101-18b 1985 Manufacturing In-Depth Survey Report: Control Technology for Chemical Process Unit Operations at ICI Americans Inc., Bayport, Texas, March 19-23, 1984
101-15b 1985 Manufacturing In-Depth Survey Report: Occupational Hazard Control Options for Chemical Process Unit Operations at U.S. Steel Corporation, USS Chemicals Division Site, Haverhill, Ohio, June 11-15, 1984
101-14a 1982 Manufacturing Control Technology Assessment Of Chemical Processes
101-13a 1982 Manufacturing Control Technology Assessment Of Chemical Processes
101-12a 1982 Manufacturing Control Technology Assessment Of Chemical Processes
101-11a 1981 Manufacturing Control Technology Assessment Of Chemical Processes
010-22a 2014 Transportation, Warehousing, and Utilities Bag handling assist controls for airport screening processes
010-03a 1999 Transportation, Warehousing, and Utilities Walk-Through Survey Report: Potential Options For The Control Of Border Agents Exposure To Vehicle Emissions
010-02a 1999 Transportation, Warehousing, and Utilities Survey Report: Potential Options for the Control of Border Agents Exposure to Vehicle Emissions at United States Port of Entry, San Ysidro, California, September 17-19, 1997
010-01a 1995 Agriculture, Forestry, and Fishing Engineering Control Observations And Recommendations For Insect Rearing Facilities
005-166 2017 Construction Spray Polyurethane Foam Chemical Exposures During Spray Application
005-164 2012 Services An Evaluation of Local Exhaust Ventilation Systems for Controlling Hazardous Exposures in Nail Salons
005-163 2014 Construction Spray Polyurethane Foam Chemical Exposures during Spray Application

 

Contact Information

Kenneth R. Mead, PhD, PE
Branch Chief, NIOSH DFSE Engineering and Physical Hazards Branch
(513) 841-4385
kcm3@cdc.gov